Finding your suitable readers for water cooling pump reservoir combo is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for water cooling pump reservoir combo including detail information and customer reviews. Let’s find out which is your favorite one.
800 reviews analysed
1. Corsair Hydro X Series, XD5 RGB Pump/Reservoir Combo, RGB Lighting
- A high-performance xylem D5 PWM pump controlled via PWM TO deliver the perfect flow balance for your loop.
- Ten top-mounted RGB LEDs light up your reservoir with stunning customizable RGB lighting when combined with a Corsair lighting Node PRO or Commander Pro.
- The integrated 330Ml Reservoir puts your custom cooling system’s coolant on display, with stunning angular design and an integrated fillport that makes filling, flushing and topping-off coolant easy.
- Included temperature sensor provides real-time coolant temperatures from inside your cooling loop.
- Rubberized mounting system reduces pump vibrations and noise, so your custom cooling loop is seen, Not Heard.
The Corsair Hydro x series XD5 RGB pump/reservoir Combo is ready to drive the world’s most demanding custom cooling systems. A xylem D5 PWM pump provides powerful flow rate for multi-block loops and is adjustable via PWM to maximize cooling capacity or minimize noise. Ten built in RGB LEDs, controlled adding a Corsair lighting Node Pro or Commander Pro and powerful Corsair iCUE software, provide a vibrant splash of control to customize your lighting, while an included temperature sensor gives you real-time performance data from inside your system, for accurate cooling adjustment. Universally compatible with G1/4 fittings and with both 120mm and 140mm fan mounting brackets included, The XD5 RGB pump/reservoir is the heart of your custom cooling system. Tech Support # 1-888-222-4346 opt #1
2. Thermaltake Pacific DIY LCS PR22 Pump/Reservoir Combo 3-Port G 1/4" Thread Tt LCS Certified Pom Pmma Cooling CL-W081-PL00BL-A
- Sturdy and durable design: featuring 6mm thick of the pipe wall, pacific pr Series can sustain the maximum pressure up to 99 psi (pounds per square inch). easily open out the top cap for cleaning.
- Driven performance: maximum discharge up to 500L/hr for efficient cooling of your components. Top cap supports rubber washers for a proper seal, including two predrilled G1/4” Ports for fittings.
- Heat-resistant acrylic Tank: featuring reliable, light weighted POM and PMMA construction, crystal clear and highly durable. High quality acrylic (PMMA) Tube maximum working temperature: 131℉ (55℃).
- Easy and flexible application: along with two brackets connected to both ends, pacific pr Series is Solid hold inside the chassis and allows enthusiasts to build up superior water cooling
- The pacific pr Series can be installed either horizontally or vertically, making the chassis out of the ordinary!
Thermaltake introduces the Pacific PR Series pump with tube reservoir set for the ultimate in custom PC water-cooling configurations. Featuring exceptional performance and unrivalled reliability, the PR22 is manufactured from High quality POM and PMMA Material to provide a crystal clear, High performance, and durable solution. By giving users ideal mounting, fitting and flow, the Pacific PR Series is the right choice for PC enthusiasts. 300ml capacity; 500 L/HR maximum flow rate. 2 Year Warranty.
3. EKWB EK-Classic XRES 250 SPC PWM RGB – Plexi (incl. Pump)
EK-XRES 250 SPC PWM Classic RGB – Plexi (incl. pump) is a value-oriented water cooling pump-reservoir combo. It has been designed to be an entry-class combo solution that is able to offer great hydraulic performance complemented with RGB LEDs for modern aesthetics. The combo unit comes with a 120mm fan mount holder included.
The core of the unit is the EK-SPC 60 water pump that uses only a 4-pin PWM FAN header for operation. No other additional connector is required! Full PWM support will allow you to set automatic pump speed regulation depending on your temperatures. Full performance on demand or whisper-quiet operation in idle mode! With a maximum head pressure of 2.2m (7.2ft), and a maximum flow of 250L/h and a very compact form
The EK-XRES 250 SPC PWM Classic RGB – Plexi (incl. pump) series pump-reservoir combo comes with a pre-installed anti-cyclone insert.
The main body features two G1/4“ threaded ports of which one is an inlet (in the reservoir) and one is an outlet (from the pump). The reservoir tube is made of quality acrylic material.
Pump electrical and mechanical properties:
– Motor: Electronically commuted motor
– Rated voltage: 12V DC
– Power consumption: 6W
– Maximum pressure head: 2.2m
– Maximum flow: 250 L/h
– Maximum system temperature: 50°C
– Materials: PPS-GF30, EPDM O-rings, Aluminium oxide, graphite
– Power connector: 4-Pin PWM FAN connector
– RGB connector – 4-pin 12V ( G R B )
– PWM duty cycle: ~ 20-100%
– Default behavior: Runs at 100% duty cycle when no PWM feedback signal is present
– Pump reservoir combo unit
– 120mm fan hole pattern mounting frame
– Mounting mechanism and all required screws and washers
4. Diyeeni 19W 12v CPU Water Cooling Pumpe Reservoir DIY Combo, 800L/H Water Pump, G 1/4" Thread Port, PC CPU Water Cooling System Heat Exchanger Tool, Transparent Acrylic Material, Easy Install(300mm)
- The water tank is integrated with the water pump for easy installation and a more beautiful appearance
- The water cooling tank features thick pipe wall, which can sustain the tremendous pressure
- The pump is waterproof and durable, ensuring a long service life
- Inlet and outlet interface: G1/4 thread
- Heat-resistant acrylic tank: featuring reliable, light weighted POM and PMMA construction, crystal clear and highly durable. In order to facilitate transportation, the pump and the water tank are disassembled and placed, and the user needs to install it simply.
Material: PMMA + POM + Anode Aluminum
Color: Black + Transparency
Tank length: 110mm, 160mm, 210mm, 300mm (Optional)
Hole site: G1/4 Thread
Rated current: 0.8A
Rated power: 19W
Water pump flow: 800L/H
Starting voltage: 12V
Maximum voltage: 13.5V
Power interface: big 4pin, small 4pin
Overall Length: Approx. 19.5cm / 7.7in
or 24.5cm / 9.6in
or 29.5cm / 11.6in
or 38.5cm / 15.1in
Diameter: 5cm / 2.0in (top), 4cm / 1.6in(bottom)
Weight: Approx. 557-640g
1 * Water Tank and Pump
2 * Plastic Buckle
2 * Metal Buckle
1 * Bag of Screw and Nut
5. IronBuddy Water Cooling Tank Reservoir G1/4 Threaded T Virus Cylindrical Cooler Tank for Computer Water Cooling System, 260mm (Grey)
- ✬Water cooling tank is made of aluminum cover and PMMA cylinder body, high quality, durable to use.
- ✬Connecting Thread: G1/4 thread (International standard), compatible with almost all G1/4 water cooling fittings.
- ✬6x G1/4 thread holes, easy to DIY your waterway and unique water cooling system.
- ✬Size: 255*55mm / 10.04*2.17inch.(Height / Aluminum Cover Diameter). Cylinder Diameter: 50mm / 1.97inch.
- ✬The cylindrical reservoir tank perfect for PC water cooling system.
IronBuddy G1/4 Threaded T VirusCylindrical Tank Perfect for PC Water Cooling System.
Materials: Aluminum + PMMA.
Size: 255*55mm / 10.04*2.17inch.(Height /Aluminum Cover Diameter). Cylinder Diameter: 50mm / 1.97inch.
Package included: 1Pcs Water CoolingTank, 2Pcs Hoop, 4Pcs Screw and Nuts.
6. Mavel Star 12v dc Submersible Mini Water Pump PC CPU Water Cooling Pump 63 GPH
- 63 GPH 4.2W 0.35A, Perfect PC Cpu Cooling pump,running it on 5/16 id vinyl tubing will be good
- 12 volt dc Submersible Centrifugal Water pump, NOT Self-priming ,design to be submerged,can be powered by battery pack, solar pannle or 12 dc power adapter, please Search ASIN (B0713T89R1 ) for the power adapter.
- Nice water pump For the Water fall,Water feature or Water foutain in Home & Garden,can be powered directly by a power adapter,please Search ASIN (B0713T89R1) for the power adapter.
- Perfect for the transfering of Water,acid or alkaline solution.
- Max working temperature: 60℃ /140F
Material: PA66+Glass fiber
Power consumption: 4.2W
Rated voltage: 12V
Rated current: 0.35A
Max flow rate: 240L/H (63G/H)
Max static head: 3m (9.8ft)
Diameter of inlet: 8mm(0.31 inch thread)
Diameter of outlet: 8mm(0.31 inch thread)
Noise: Waterproof level: IP68
Lifespan: More than 30,000hrs
Power supply: DC electric source (bared wire)
Driving method: Brushless, Magnetic
Max working temperature: 60℃/140F
Item dimension: 51mm*34mm*42.7mm
1. Working at rated voltage (DC12V/0.35A). The positive pole is red wire, the negative pole is black wire/blue wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
How to Choose pump:
1. Make sure the working voltage, current, head and flow. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump;
2. Make sure the dimension (threaded interface or not, the direction and diameter of outlet and inlet);
3. Working environment (temperature and medium);
4. Other functional requirements, such as time control, motion control, pressure control, flow control, and speed adjustment.
1 * Water pump
7. PC Water Pump Tank,Computer Liquid Water Cooling Radiator Acrylic Cylinder Water Reservoir Tank,Full Open Design Noise Reduction Water Cooling Tank
- 【Complete Water Tank Kit】A kit of computer water cooling reservoir, consists of a main water reservoir, plastic brackets, L-type metal stand and screws kit.
- 【Efficient Heat Dissipation】Effectively for heat reducing, maintain the proper temperature to keep the computer running well.
- 【High-quality Materials】Made of high-quality POM and PMMA material, shock, acid and alkali resistance, durable to use.
- 【Excellent Design with Multiple Functions】full open design, free to screw up and down. Noise reduction, work quietly and do not disturb you while you are working or studying on the computer.
- 【100% Satisfaction Guarantee】 If you have questions about the product or are not satisfied with it, please contact us at any time, we will provide you with a best solution. Your satisfaction is our main concern.
A kit of computer water cooling reservoir, consists of a main water reservoir, plastic brackets, L-type metal stand and screws kit. Effectively for heat reducing, maintain the proper temperature to keep the computer running well. Made of high-quality POM and PMMA material, shock, acid and alkali resistance, durable to use. Full open design, free to screw up and down. Noise reduction, work quietly and do not disturb you while you are working or studying on the computer.
Screw Thread: G1/4
Material: POM + PMMA
Interface Diameter: Approx. 12.9mm
Package Size: Approx. 20 * 14 * 7cm
1 * Cylinder Water Reservoir
2 * Plastic Brackets
2 * L-Type Metal Stands
1 * Screws Kit
8. Corsair Hydro X Series, XD3 RGB, Pump/Reservoir Combo
- A high-performance Xylem DDC PWM pump controlled via PWM delivers the perfect flow balance for your loop.
- 16 Individually addressable RGB LEDs light up the integrated reservoir with stunning customizable RGB lighting when combined with a CORSAIR iCUE Commander PRO or iCUE Lighting Node PRO.
- The XD3’s unique compact form factor fits easily inside most systems, powering even the most compact custom cooling loops.
- The integrated 180ml reservoir puts your custom cooling system’s coolant on display, with stunning angular design and an integrated fill port that makes filling, flushing and topping-off coolant easy.
- The included temperature sensor provides real-time coolant temperatures from inside your cooling loop, enabling automatic cooling control when paired with an iCUE Commander PRO and powerful CORSAIR iCUE software.
The CORSAIR Hydro X Series XD3 RGB Pump/Reservoir Combo is ready to drive even the most compact custom cooling systems. An adjustable Xylem DDC PWM pump provides powerful flow rate for multi-block loops, while an integrated 180ml reservoir ensures the XD3 fits easily into most systems. 16 Built-in RGB LEDs, when combined with a CORSAIR iCUE Lighting Controller and powerful CORSAIR iCUE software, provide vibrant customizable lighting. An included temperature sensor gives you real-time performance data from inside your system, for accurate cooling adjustment. Universally compatible with G1/4 fittings and with both 120mm and 140mm fan mounting brackets included, the XD3 RGB Pump/Reservoir is the heart of your custom cooling system. Tech Support # 1-888-222-4346 opt # 1
9. Yosoo SC-300T DC 12V Ultra-Quiet Water Cooling Pump Tank 4W Reservoir max.300L/h for PC CPU Liquid Cooling System
- Used in computer water cooling system
- LED power indicator to indicate power-on state
- Control circuit,the pump is more stable
- Support speed testing function
- Small 3P power connector can be directly plugged into the headboard fan original position
- With rubber shock absorber base,ultra-quiet experience.(Tips:It is good to use the pipe with 8MM inner diameter)
- Head:max 1.9 meters
- Power: 4W
- Water tank capacity: 150ml
– Flow:max 300L/h
– Head:max 1.9 meters
– Power Connector: Small 3P connector
– Power: 4W
– Water tank capacity: 150ml
– Dimensions:Length 66mm * wide 56mm * height 86mm (net size, excluding out of faucets, shock absorber)
– Tap Diameter:9.4 mm
– LED power indicator to indicate power-on state
– Control circuit,the pump is more stable
– Tap out the instructions marked
– Small 3P power connector can be directly plugged into the headboard fan original position
– Support speed testing function
– With rubber shock absorber base,ultra-quiet experience.（Tips:It is good to use the pipe with 8MM inner diameter）
– 1pcs ultra-quiet Water pump
10. EKWB EK-Quantum Kinetic TBE 300 D5 PWM Pump-Reservoir Combo, D-RGB, Plexi
EK-Quantum Kinetic TBE D5 combo unit is the revolution of the most popular pump-reservoir assembly design on the market. The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine D5 pump! The reservoir is equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops.
The top features three G1/4″ ports, one of which has a pre-installed nickel-plated brass internal tube which helps to prevent the splashing of the coolant inside the reservoir if the top is to be used as an inlet.
The 60mm diameter tube is made of high-quality acrylic material just like the reservoir bottom and top while the sealing is performed by a quality EPDM o-ring.
The integrated addressable D-RGB is compatible with popular RGB sync technologies from all major motherboard manufacturers.
This reservoir can be easily upgraded with longer acrylic tubes used by EK-RES X3 series reservoirs.
Pump electrical and mechanical properties:
– Motor: Electronically commuted spherical motor
– Rated voltage: 12V DC
– Power consumption: 23W
– Maximum pressure head: 3.9m
– Maximum flow: 1500L/h
– Maximum system temperature: 60°C
– Power connector: 4-Pin Molex- and 4-Pin PWM FAN connector
– Reservoir diameter 60mm
– Reservoir free volume: 405mL
– Overall unit height: 300mm
– D-RGB connector standard 3-pin (5+, Digital, Blocked, Ground)
– EK-Quantum Kinetic TBE 300 D5 PWM D-RGB
– Mounting clip with rubber insert
– Self-adhesive mounting hole pattern sticker
– Mounting mechanism (incl. required Allen keys)
By our suggestions above, we hope that you can found Water Cooling Pump Reservoir Combo for you.Please don’t forget to share your experience by comment in this post. Thank you!