Finding your suitable readers for motor 100 hp is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for motor 100 hp including detail information and customer reviews. Let’s find out which is your favorite one.
537 reviews analysed
1. DB Electrical TRM0071 Tilt Trim Motor For Yamaha Marine 40 50 60 75 80 90 100 HP 95 96 97 98 99 00 01 02 03/4 Stroke/62Y-43880-01-00, 62Y-43880-02-00, 69W-43880-00-00, 69W-43880-09-00, CS3-43880-00-00
YAMAHA Tilt & Trim Various Models 1995 40-100 H.P.
YAMAHA Tilt & Trim Various Models 1996 40-100 H.P.
YAMAHA Tilt & Trim Various Models 1997 40-100 H.P.
YAMAHA Tilt & Trim Various Models 1998 40-100 H.P.
YAMAHA Tilt & Trim Various Models 1999 40-100 H.P.
YAMAHA Tilt & Trim Various Models 2000 40-100 H.P.
YAMAHA Tilt & Trim Various Models 2001 40-100 H.P.
YAMAHA Tilt & Trim Various Models 2002 40-100 H.P.
YAMAHA Tilt & Trim Various Models 2003 40-100 H.P.
2. A1728, 1/4 HP Condenser Fan Motor 1075RPM, 1.8AMP
- 1/4HP, Outdoor Condenser Fan Motor, 208-230 volt, 1075 RPM, 1.8AMP
- Capacitor (not included) 5 MFD/370V
- Replaces: AOS Century FSE1026S, Emerson: 1860, MARS 10728, Fasco D909, GE/Genteq 3728, Packard 43728, Partner’s Choice: 01-0161, Rheem Protech W51-14CJA1-01, Carrier RCD: P257-8728, York Source 1: S1-FHM3728, Wagner: WG840728
- Repair video: https://youtu.be/VxEcFCR6TkI In addition, the motor comes with drain plugs on both end-shields. If you install the motor shaft (facing) down, you need to remove the drain plug on the shaft side end-shield. If you install your motor shaft up, you need to remove the plug on the non-shaft end. This will allow moisture and condensation to drain out of the motor
- All Angle, ball bearing
- Rheem mounting holes w/screws installed
- Water slinger on shaft
- Thru-bolt or band mounting
- Double full flatted shaft
- Class B insulation
- Single phase, 60 hertz
- Thermal overload protected
- Fan duty, continuous, air over
- Totally enclosed non-ventilated
- 36 inch leads
- Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find them on millions of HVAC units including Carrier, Goodman, Trane and other brands
- If you are a distributor, please continue your normal channel to source Broad-Ocean motors. Thank you. This retail venue is for contractors, repair technicians, and do-it-yourselfers, who otherwise may not have been adequately served with Broad-Ocean motors
Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find it on millions of HVAC equipment including Carrier, Goodman, Trane and other brands. If you are a distributor, please continue your normal channel to source Broad-Ocean motors. The Amazon venue is intended for contractors, repair technicians, and do-it-yourselfers, who otherwise many not have been adequately served with Broad-Ocean motors.
3. MARS – Motors & Armatures 10728 1/4hp 1075rpm, 1 Speed 1.8 Amp Outdoor Condenser Fan Motor
1 speed motor; 1.8 amp; use to replace motor for other popular models; 16.7 pounds; 15 inches in length.
4. Century B2854 1-1/2 HP, 3450 RPM, 8.0/16.0 Amps, 1.1 Service Factor, 56Y Frame, PSC, ODP Enclosure, Square Flange Pool Motor
Common applications are: pool and spa pumps, -Inch1081-Inch low service factor.
5. Bell & Gossett 111034 Water Circulator Motor for Series 100, Split-Phase, 1/12 hp, 1725 Nameplate RPM, 115 V
6. Seamander Outboard Motor Cover,Full Motor Outboard Cover, Engines Cover Waterproof Boat Cover
- Made of Marine grade heavy-duty, waterproof polyester.
- Covers the whole motor from top to prop with the measurement of: Circumference: Up to 57 Inches Width x Height Up to 47 Inches
- Prevent fading and creaking on motor from exposure to SUN, RAIN, WIND, etc
- Drawstring & zipper provides secure snug fit.Reinforced Top-stitched seams.
- One year factory limited warranty
- Note: Please check measurements before purchase
These strong motor covers are made of Marine Grade Polyester .Seamander Motor Covers by Wake offers all purpose, easy slip-on motor covers that will keep your outboard motor looking great and protected against harmful environmental conditions. Keep your new outboard motor looking good and protect it against harmful environmental conditions. Our motor covers have been redesigned to better fit all makes of outboard engines. Simply measure your outboard motor and determine those dimensions that most closely match your particular model.
7. Fasco D540 3.3-Inch Diameter Shaded Pole Motor, 1/100 HP, 115 Volts, 1500 RPM, 1 Speed, 0.6 Amps, CW Rotation, Sleeve Bearing
From the Manufacturer
Shaded Pole Motor, 1/4-Inch x 2-1/4-Inch Shaft Dimension 2 1/8, ‘A’ Dim
8. Fasco D7909 5.6-Inch Condenser Fan Motor, 1/4 HP, 208-230 Volts, 1075 RPM, 1 Speed, 1.8 Amps, Totally Enclosed, Reversible Rotation, Ball Bearing
Motor Type: Permanent Split Capacitor RPM: 1075 HP: 1/4 Volts: 208-230 Amps: 1.8 Hz: 60 Phase: Single Phase Thermal Protection: Automatic Speeds: 1 Rotation: Reversible Bearings: Ball Enclosure Type: Totally Enclosed (TE) Frame Size: 5.6″ Frame Motor Diameter (In.): 5.6 Motor Length (In.): 4 Shaft (In.): 1/2 X 6 1/2 Bolt Circle (In.): 5-6/32 (5.2)
From the Manufacturer
PSC motor, 4 drilled and tapped holes in the shell, all angle mount bearings, 60 Degree ambient temperature rating, 1/2-Inch x 6-1/2-Inch shaft, 5mfd/370V Capacitor Needed – Not Included
9. OEM Upgraded Carrier Bryant Payne 1/8 HP 230v Condenser Fan Motor HC35GE237
10. HVAC Motor, 1/100 HP, 3000 rpm, 120V, 3.3
By our suggestions above, we hope that you can found Motor 100 Hp for you.Please don’t forget to share your experience by comment in this post. Thank you!