We spent many hours on research to finding cooling coil, reading product features, product specifications for this guide. For those of you who wish to the best cooling coil, you should not miss this article. cooling coil coming in a variety of types but also different price range. The following is the top 10 cooling coil by our suggestions
585 reviews analysed
1. COLDBREAK 12.5′ Wort Chiller, 3/8", 100% Pure USA Copper, 8′ Vinyl Tubing, Heavy-Duty Garden Hose Fitting, Homebrewing
- 12. 5-foot kitchen copper worth chiller. Designed for 2-3 gallon batches (brewing kits)
- Made in Michigan with 100% pure 3/8-inch OD USA Copper tubing
- 8 feet of vinyl tubing – (2) 4-foot lengths
- Strong stainless steel hose clamps
- Heavy-duty lead free female garden hose fitting (USA made)
- 6. 75-Inch coil diameter 3-inch coil height 13. 5-Inch inlet/outlet height
- TEST BEFORE USE (EVERY TIME) – Hose clamps need to be checked for leaks before each use. Tightening the hose clamps while the vinyl tubing is warm will create a tight, leak free seal.
2. COLDBREAK 25′ Wort Chiller, 3/8", 100% Pure USA Copper, 4′ Vinyl Tubing, Heavy-Duty Garden Hose Fitting
- Premium 25-foot chiller made with 3/8-inch OD USA Copper tubing
- 2×4-foot lengths of 3/8-inch vinyl tubing
- Strong stainless steel hose clamps. Hose clamps need to be checked for leaks before each use. Tightening the hose clamps while the vinyl tubing is warm will create a tight, leak free seal.
- Heavy-duty lead free female garden hose fitting (USA made)
- 6. 75-Inch coil diameter 5. 5-inch coil height 14-Inch inlet/outlet height
- Made in the USA
3. XSPC Antimicrobial Silver Coil
XSPC Antimicrobial Silver Coils help to inhibit bacterial growth and algae when added to your watercooling loop. XSPC Silver Coil are made in the UK from 99.999% pure silver.
- Ribbon Dimensions: 75 x 3 x 0.5 mm
- Coiled Dimensions: 20 x 10mm
- Surface Area: 500mm square
- Weight: 1.3g
- Material: 0.999 Fine Silver
4. Nxtop 3.2M 10.5Ft Long 3mm Dia Copper Tone Refrigeration Coiled Tubing Coil
Description: It's very thin, copper material It is used for refrigerator , freezer and air conditioner It can cool air.
5. uxcell a14030400ux0182 3.2M 10.5Ft Long 3mm Dia Copper Tone Refrigeration Coiled Tubing Coil Model:
6. uxcell Refrigeration Tubing, 1/8" OD x 3.3Ft Length Copper Tubing Soft Coil with Metal Brass Tube Fitting
- 【1/8″ OD X 5/64″ ID X 3.3 FT】Refrigeration tube outer dia is 1/8″, inner dia is 5/64″, total length is 3.3F/1m long
- 【HIGH REFRIGERATION EFFICIENCY】Good heat dissipation and refrigeration capability,high strength at low temperature.Copper tubes are hollow,so has strong heat transfer capability.If you need refrigeration for refrigerators, freezers, air conditioners, this is a good choice
- 【HIGH QUALITY COPPER MATERIAL】Copper refrigerator tube has the features of high temperature resistance, corrosion resistance, oxidation resistance, durability, long service life
- 【SOFT & SHAPE CHANGEABLE】Because refrigeration copper pipe can bend and deform, they can often be made into elbows and joints. Smooth bending allows copper tubes to bend at any angle
- 【WIDELY APPLICATION】Refrigerant Tubing not only used for refrigerator, freezer and air conditioner as refrigeration tubing coil, but also used as automobile car oil pipe
The Copper tube is fine ductility, corrosion resistance and weld ability. It is mainly used for refrigerator, freezer, air conditioner and other equipment for heat exchange. It is also used as automobile oil pipe.
Product Name: Refrigeration Tubing
Net Weight: 60g
Color: Copper Tone
Thickness : 0.5mm
Short flared nuts quantity: 2
1pcs x Refrigeration Tubing
Low melting point, high strength, easy welding, Corrosion resistance
Wonderful plasticity, easy to machining under hot and cold pressure
Renewable Utilization and environmental protection
Used in refrigerator, freezer and air conditioner
Used as automobile oil pipe
7. HomeBrewStuff 25′ Copper Immersion Wort Chiller – Deluxe Package with 2x 12′ Hoses, Fittings, Faucet Adapter
8. 1800W ZVS Induction Heating Board Module Low Voltage High Frequency 12-48V Flyback Driver Heater with Tesla Coil and Cooling Fan
- The induction heating boards maximum power is 1800W, adopted super PCB layout design and super heat sink, heat dissipation good, since with a cooling fan interface, can also do Tesla discharge, generator voltage inverter, etc
- The induction heating circuit adopt 12-48V DC power supply, maximum current is 40A, the power uo to 1800W. It can work continuously under the condition of good heat dissipation. moderate power which make it can be used to quenching, annealing and other heat treatment. also for melted with graphite crucible kim/silver/ copper/aluminum and so on, heating is evenly and fast
- it is recommended that not exceed 48V 35A to prevent accidents and damage,Although withstand more than 40A current.Induction heating is recommended to use 36V 20A power supply, 12V power supply is too small almost without response, and 12V power might lead to the voltage decreases, which is very dangerous.More than 24V/20A power supply, the greater the voltage/current, the greater the heating power, heating faster.
- please check the power output meets the requirements if the MOS tube fever,and be sure to do a good job of cooling.Do not empty the board, otherwise it will create a very high noise, then MOS tube will burn out
- please do not to heat too large metal, otherwise it may be overloaded, please add a 35A fuse or ammeter and air switch for better use (not included).
Product size:Approx.180x90x80mm (please allowed 1-3mm error)
Heater ring inner:70mm (Recommended crucible+quartz suit,maximum support of 58mm crucible)
New style :AC 100-220V Adapter
Old style: Main board Input voltage: 12V-48V recommend: 36V above
Power requirements: less than 12V≥10A , 15V above≥15A
NOTE:New style and Old style shipped by randomly!!!
It doesn’t affect the performance of product.!!!
Maximum power: 1800W
Maximum current: 40A
1 x PCB board
1 x 48V copper tube
1.The power of heating is very large, except that the plate and components are hot, and the heat of copper tube is very high. you can buy a small water pump and 2 meters of rubber hose(inner diameter is 4mm) for build a water cooling system
Please pay attention to using switch power supply, because output voltage is slowly rising, and if the voltage rise to 10V before connected induction heating circuit that will be lead to circuit can’t afford to vibrate caused by lacking voltage,so that the two MOS tube conduction and components will burned
comes with heating circle diameter-60 mm/design voltage-36V,if you use more than 40V Devices shall be used ≥70 mm diameter heating ring, DC 12V water pump use, please use separate power supply voltage regulator module to avoid fan and water pump are burn out
The minimum input is 12V, but it doesn’t mean all 12V power supply available,The module has specific requirements on voltage and current , 12V require current must than 10A ,output power will greatly reduced if the power is too low ,which will lead to two MOS conduction at the same time & burn MOS tube when lower than 12V
9. StarTech.com 1U 60x10mm Socket 7/370 CPU Cooler Fan -Low Profile CPU Cooler w/ Copper Heatsink & TX3 (FAN3701U),Black
This 60x10mm Socket 7/370 CPU Cooler helps keep your 1U servers running smoothly, by providing a reliable, cost-effective server cooling solution. The server CPU cooler features a copper base and socket-type CPU fan, ensuring rapid heat dissipation in the reduced space of a 1U server environment. The CPU cooler is powered through a simple TX3 connection to the server power supply, and is suitable for all Intel Celeron/PIII processors and AMD Athlon/Duron processors up to 1GHz.
10. Water to Air Heat Exchanger 1" Copper Ports for Outdoor Wood Furnaces, Residential Heating and Cooling, and Forced Air Heating (22×24)
- 60kBtu CAPACITY: This water to air heat exchanger can heat your air at up to 60,000 Btu per hour.
- 22×24 GALVANIZED STEEL CASING
- 1″ COPPER SWEAT CONNECTIONS: A strong steel casing surrounds the body of the heat exchanger for support.
- HIGH QUALITY ALUMINUM AND COPPER: 12 aluminum fins per inch and 3 rows of 3/8″ seamless copper tubes maximize heating or cooling efficiency.
- FREE 1-YEAR WARRANTY: Our product comes with a 1-year warranty to cover manufacturer defects.
- APPLICATIONS: These can be used for Outdoor Wood Furnaces, Residential and Commercial Heating and Cooling, Forced Air Heating, Hybrid Systems, Air Conditioning, Dehumidification, Inverter Cooling
By our suggestions above, we hope that you can found Cooling Coil for you.Please don’t forget to share your experience by comment in this post. Thank you!