Nowadays, there are so many products of case cooling and power supply kit in the market and you are wondering to choose a best one.You have searched for case cooling and power supply kit in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings case cooling and power supply kit which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
562 reviews analysed
1. Thermaltake Smart 500W 80+ White Certified PSU, Continuous Power with 120mm Ultra Quiet Cooling Fan, ATX 12V V2.3/EPS 12V Active PFC Power Supply PS-SPD-0500NPCWUS-W
- Delivers 500 Watt Continuous output @ +40 degree. Compliance with Intel ATX 12 Volt 2.31 & EPS 12V 2.92 standards
- 80 PLUS Certified, 80percentage efficiency under typical load
- Supports (2) PCI E 6+2pin Connectors. Active (PFC) Power Factor Correction, MTBF: 100,000 hours
- Industry Grade Protections: (OPP) Over Power Protection, (OVP) Over Voltage Protection, (SCP) Short Circuit Protection
- High Quality Components
- Equipped with a powerful +12 Volt rail, superior performance under all types of system loading
- 5 Year Warranty
Incorporating various high-quality components, The smart series – models are Rated from 500W to 700W – saves energy through its high efficiency of up to 86% and accommodates any mainstream build with the most demanding requirements. An embedded intelligent cooling fan delivers excellent Airflow at an exceptionally low noise level. Additionally, the single +12V rail design enables non-stop usage with stable and reliable performance. Smart Series adopt 120mm cooling fan delivers excellent Airflow at an exceptionally low noise level. Smart Series saves energy through its high energy efficiency of up to 86% and is 80 PLUS standard Certified. High quality components enable non-stop usage with stable and reliable performance, no more capacitor explosion and leakage. Single +12V output.
short P/N: spd-0500p
type: Intel ATX 12V 2.3
max. Output capacity: 500w
dimension (H x W x D): 86mm x 150mm x 140mm
pfc （power factor correction）: active pfc
power good signal: 100-500 msec
hold up time: 16msec (minimum) within 60% load
input current: 8a max
input frequency range: 50 Hz – 60 hz
input voltage: 100Vac – 240vac
operating temperature: 5℃ to +40℃
operating humidity: 20% to 85%, non-condensing
operating temperature: -40 ℃ to +55 ℃
operating humidity: 10% to 95%, non-condensing
cooling system: 120mm fan: 1800 R.P.M. 10%
efficiency: 82-86% efficiency @ 20-100% load
mtbf: 100, 000 hrs minimum
safety Approval: CE/CB/TUV/ UL/ fcc
pci-e connector: PCI-E 6+2pin x 2
2. Thermaltake Versa N24 Black ATX Mid Tower Gaming Computer Case Chassis with Power Supply Cover, 120mm Rear Fan preinstalled. CA-1G1-00M1WN-00
- Top Mount I/O Ports: 1x USB 3.0, 2x USB 2.0, 1x Headphone, 1x Mic Front Ports
- Power Supply Cover: Streamline your cable management with the included Power supply cover to hide cable clutter
- Storage Options: 2x External 5.25 inches Drive Bays, 2 x 2.5 inches / 3.5 inches Internal Drive Bays (with HDD Tray) with back panel accessible hidden drive access
- Air/Liquid Cooling Configurations Options: 1 x 240mm radiator(Top/Front). 1 x 120mm radiator (Rear), 2 x 120mm or 2 x 140mm Fans locations (Top) with 2 x 120mm Fan locations (Front)
- Complete solution: Support up to 240mm radiator liquid cooling for ideal CPU cooling application, up to 415mm long graphic card (without front fan(s))
Thermaltake Versa N24 Black SPCC ATX Gaming Mid Tower with PSU Cover Computer Case CA-1G1-00M1WN-00
Perfect for the first build or the next one, the Versa N24 Mid Tower Chassis shows its horse power with a unique piping system ready for the starting line. Gain more with cooling performance, tool-free installation and options for both air and liquid cooling configurations at an affordable price. With extended GPU fitment up to 415mm lengths, build your next PC hot rod built for gaming. Designed for maximum ventilation from top to bottom the Versa N24 is a great choice, at the right price.
Fan Configurations: (Optional)
1 x 120mm or 2 x 120mm or 1 x 140mm or 2 x 140mm
1 x 120mm or 2 x 120mm
1 x 120mm
Radiator Configurations: (Optional)
1 x 120mm or 1 x 240mm
1 x 120mm or 1 x 240mm or 1 x 140mm or 1x 280mm
1 x 120mm
Please visit our website or search "Thermaltake Support" for any assistance.
3. Freenove Starter Kit for Raspberry Pi 4 B, Acrylic Protective Case, Adjustable Cooling Fan, 3A Power Supply with Switch, 32 GB SD Card
- Necessary items ->
- If you just bought a Raspberry Pi 4 B, then you need this kit to make it run.
- Power & Fan board ->
- Provides independent port for Fan, which won’t affect GPIO pin anymore. It also integrates a power switch.
- Adjustable fan ->
- Working Raspberry Pi 4 B is very hot. A cooling fan is needed.
- Strong power ->
- This kit includes a 3A power supply with a useful power switch.
- Detailed tutorial ->
- Step-by-step guidance brings you into the Raspberry Pi world. Download Link: https://git.io/fjN1u
4. Asiahorse Customization Mod Sleeve Extension Power Supply Cable Kit 18AWG ATX/EPS/8-pin PCI-E/6-pin PCI-E (Black)
- 1.1×24 Pin ATX Extension Cable, 1x(4+4)Pin EPS Cable,2×8 Pin PCI-e Cable,2×6 Pin PCI-e Cable
- 2.Each psu cables comes in 300mm in length with black connectors on both ends,includes cable combs (4Pcs each cable)
- 3.TRIPLE layer cable weaving design with 18AWG wire,pass test Mechanics
- 4.For a clean cable management and a uniform design offers a better solution to modding enthusiasts with M/B and PCI-E Cables
- 5.Can Customization The Length and Color
5. CanaKit Raspberry Pi 3 B+ (B Plus) with Premium Clear Case and 2.5A Power Supply
- Includes Raspberry Pi 3 B+ (B plus) with 1.4 GHz 64-bit Quad-Core Processor and 1 GB RAM
- CanaKit 2.5A USB Power Supply with Micro USB Cable and Noise Filter – Specially designed for the Raspberry Pi 3 B+ (UL Listed)
- Dual band 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Enhanced Ethernet Capability
- Premium Clear Case, Set of 2 Aluminum Heat Sinks
- CanaKit Quick-Start Guide
IMPORTANT NOTE: If you see a rainbow splash screen with a lightning bolt symbol, this indicates you are NOT using B+ compatible software. NOOBS 2.7.0 or later is required for operation of the B+.
An exclusive kit from CanaKit that includes the fastest model of the Raspberry Pi family – the Raspberry Pi 3 Model B+ (B Plus)!
The Raspberry Pi 3 Model B+ is the latest production Raspberry Pi 3 featuring a 64-bit quad core processor running at 1.4 Ghz. It incorporates built-in WiFi and Bluetooth connectivity with enhanced dual-band 2.4 GHz and 5 GHz WiFi, Bluetooth 4.2/BLE and faster Ethernet.
To take full advantage of the improved power management on the Raspberry Pi 3 B+ and provide even support for even more powerful devices on the USB ports, a 2.5A adapter is recommended.
The power supply included in this kit incorporates a noise filter to provide the highest stability and comes with a 5-foot cable. This power supply can power the Raspberry Pi 3 B+ and other USB accessories (such as most portable hard drives) without requiring an external powered USB hub.
The kit also includes a premium quality case specially designed for the Raspberry Pi 3 B+.
6. Argon ONE Case with 4GB Raspberry Pi 4 and Noobs | Aluminum Heatsink with Cooling Fan | Includes: HDMI Cable, Power Supply | Power Button
- SLEEK MULTIMEDIA KIT | The kit puts the case, a 5.25V 18 Watts power supply, an HDMI cable, a 4GB Raspberry Pi 4 B, and a 32GB micro SD card and micro SD card reader in one convenient package. It’s a great way to enjoy pastimes such as retro gaming, watching movies, playing music with style. The case supports Raspbian, LibreElec, Retropie, Recalbox, and OSMC.
- PASSIVE &
- ACTIVE COOLING | The Argon One itself acts as the Raspberry Pi’s heatsink for passive cooling. A proprietary software controls the fan inside the case for an active and improved temperature management.
- EASY ASSEMBLY &
- NEAT CABLE MANAGEMENT | Assembling the case with the Raspberry Pi is easy. Installing the Argon ONE Script that unlocks the full functionality of the Argon ONE in one line. All of the ports are accessed at the back, making the mini-computer manageable with minimal cable clutter and easy cleaning.
- PROPER SYSTEM SHUTDOWN | A proper power button is installed on the case to prevent file damage. Safe Shutdowns, Reboots, and Forced Shutdowns are built in features.
- MAGNETIC REMOVABLE TOP &
- ACCESS TO GPIO | The PCB Board built into the case provides separate power sources to the fan and power switch, as well as extending the GPIO pins to use the case in multiple projects. A magnetic removable top makes the pins safe when they aren’t in use.
Clean Stylized Design | Argon One Case is made for people to get into computers, programming and electronics. Its metal aluminum alloy and polished gray finish complements its modern, sleek, stylish and minimalist design. Ultimately, the Argon One Case combines armor-like durability with functionality and futuristic aesthetics all in one package.
Amazing Cooling | The aluminum alloy top doesn’t just make it look cool, but cools the computer too. This boosts the processor performance of the Raspberry Pi as the case dissipates heat more efficiently than any other case in the market. The whole case becomes a heatsink passively cooling the CPU. To top it off, the case comes with a built-in PCB board with a fan attached to actively manage the temperature of the device. These two cooling systems combined guarantee long-lasting use without overheating better than any other case like the Flirc. The fan speed can be configured anytime via the Terminal App in Linux, as well as the conditions for automating the fan speed.
Minimal Clutter | All the ports of the Raspberry Pi 3 B+ are now accessed at the back for better cable management.
Easy to Assemble | The case comes with a top and bottom, 4 screws, a built-in PCB Board, a silicon thermal pad, and a PCB Board that extends the audio and HDMI ports. Combining the parts together is simple and intuitive. All that is needed is a four-way screwdriver to assemble the case.
Access to GPIO PINS | Accessible GPIO pins A magnetic removable top makes the Pins accessible at all times, allowing the computer to be used in various electronics projects.
Safe System Shutdown | The case’ Power Button turns the computer ON and OFF while ensuring that the files stored are safe. The activated Power Button initiates a Soft Shutdown prior to completely cutting the power/current in the Raspberry Pi.
7. Ingers Aluminum Alloy Case Kit for Raspberry Pi 4, with 5.1V USB-C Power Supply with ON/Off Switch, Cooling Fan, 4 Aluminum Heatsinks, Screwdriver, Rubber Feet for Raspberry Pi 4 Model B
- 【High quality】Aluminum alloy middle frame has more artistic appearance and is more durable and easier to install. Designed for Raspberry Pi 4, does not affect WIFI or Bluetooth signals, perfectly protect your Raspberry Pi components (Note: Raspberry Pi board is not included).
- 【Perfect Compatibility】Optimized design of each interface of the shell to make it tightly packed without affecting the insertion, It completely fits all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD CARD slot.
- 【Multifunction】 5.1V 3A USB C power supply with ON / OFF switch, it’s convenient to power on and power off your Raspberry Pi 4. This package also includes a very cool 30mm*30mm*5mm small fan and 4 heat sinks which with good heat dissipation, double cooling and protecting CPU, GPU and RAM of your Raspberry Pi.
- 【Easy to install】 Installing Raspberry Pi 4 just three steps. With anti-slip design at the bottom can be used at anywhere you want.
- 【What you get】Raspberry Pi 4 case, 5.1V 3A USB-C power supply, cooling fan, screwdriver, 4 * aluminum heat sinks, 4 * rubber feet. In addition, we will provide you with 6 months after-sales warranty service and 30-days unconditional return policy.
Ingers for Raspberry Pi 4 Case(Red)
▶ Stylish and textured aluminum alloy frame design, not easy to damage;
▶ Will definitely not affect WIFI signal reception, perfectly protect your Raspberry Pi components;
▶ Keep your Raspberry Pi 4 Model B motherboard safer and nicer.
Good heat dissipation function:
▶ Comes with a very cool 35MM small fan and 4 heat sinks, very suitable for the heat dissipation of Raspberry Pi board.
5.1V 3A USB C Power Supply:
▶ Designed for Raspberry Pi 4 computer to provide enough electricity supply for your Raspberry Pi 4.
▶ New upgrade with ON/OFF switch, it’s convenience to power on and power off your Raspberry Pi 4.
Easy to install:
▶ Easy installation in just three steps. We are concerned that you may not have a Phillips screwdriver in your home,
▶ So we will provide you with a free screwdriver that you can use to easily complete the installation.
▶ 1 * Raspberry Pi 4 case,
▶ 1 * 5.1V 3A USB-C power supply,
▶ 1 * Cooling fan(30mm*30mm*5mm),
▶ 1 * screwdriver
▶ 4 * Aluminum heatsinks,
▶ 4 * Rubber feet
▶ If you don’t like our product or don’t want it, we will happily accept the return and give you refund, we have 30 days money back guarantee, 24 months exchange.
Tips: This product does not include Raspberry Pi board!
8. Vilros – Raspberry Pi 4 Basic Kit [2GB] – Includes Fan-Cooled Case, Power Supply with Switch, Heatsinks, HDMI Adapter, Quickstart Guide
- KEEP YOUR PROCESSOR COOL: The busier a processor gets, the more it heats up, leading to suboptimal performance. To prevent this common issue, we’ve included a pre-installed and ready-to-connect fan in the case. Also included are a set of 4 heat sinks that can help to passively expel heat from your setup. These cooling mechanisms will help push the limits of your processor and increase its flexibility.
- SIZABLE RAM: This Raspberry Pi 4 comes equipped with 2GB of RAM, which is the same amount of RAM many mainstream laptops contain. With 2GB of RAM, your processor will be capable of running retro gaming setups and common computer applications, media players and much more!
- SIMPLE TO TURN ON & OFF: This kit includes a USB-C Raspberry Pi 4 compatible power supply with an easy-to-use on/off switch that was designed specifically for the Raspberry Pi 4 model to streamline processing.
- IMPROVEMENTS FROM PREVIOUS MODELS: This latest model of the Raspberry Pi 4 offers groundbreaking increases in processor speed, multimedia performance, connectivity, memory and more! The desktop performance of this model is comparable to entry-level x86 PC systems.
- VERSATILE USE: The Raspberry Pi may have a small processor, but it is a highly adaptable little computer that can replace your desktop PC. Its functions range from practical to nostalgic, since it can power an ad-blocking server as easily as it can power an outmoded gaming setup. Other uses include but are not limited to printing from non-wireless printers, playing media, making time-lapse videos, and building multiplayer network game servers and motion-capture security systems.
9. Aukru Raspberry Pi 3 B+ Case kit with Fan Heatsinks, 5V 3A Power Supply with On/Off Power Switch for Raspberry Pi 3 B+, Pi 3 Model B, Pi 2 Model B
- Aukru kit for raspberry pi 5V 3000A power supply with Switch + housing case + cooling fan + cooler heatsink perfect for raspberry pie 3
- Transparent case use strengthened plastic – That is 2 Piece Injection Moulded and Snaps Together Holding Your Raspberry 2 & 3 Firmly in Place with Four Metal Screws
- Micro usb charger with turn on/off swtich,so it is very convenient No need to pull the cable to restart or reboot your PI, just press the button to turn your Pi on and off
- Small cooling fan could cool the pi module temperature. Heatsinks cooling your raspberry pi. there is stickness on the back of the heatsinks
- Warning:when install, put the pi module tilt, set up the hdmi port/micro usb port aligned with the corresponding hole, like the 3rd step of the last photo
Aukru pi set – 5v 3a switching charger heatsink fan for Raspberry pi 3 model b / pi model 2B / B+ clear case
– Perfect protection for the Raspberry Pi 3 Model B
– Clear transparent design on two-piece injection molded ABS housing, it is easy to use You just need to click together, after you fix your pi board on it firmly
– All major ports are fully accessible
– On / Off switch to restart or reboot your pi
– Input: AC 100-240V 50/60Hz 0.3A
– Output: DC 5V 3A (3000mA)
– Cable length: approx.150cm
– Color: Black
– Material: 2x aluminum heatsink(1 large – green & 1 small – siliver);1x copper heatsink
– With high-quality thermal pad for easy Stickers
– Perfect for 24-hour operation or overclocks
cooling fan – Mini 3x3cm DC 5v 0.2A fan give your Raspberry Pi CPU excellent cooling and ventilation with our easily attachable Pi Fan. This fan will replace the hot air in the case with fresh cool air keeping your temperatures lower.
Fan is attached with four metal screws (supplied) to case
1, please put the pi module tilt,
2, when the hdmi port/micro usb port aligned with the corresponding hole,
3, put the module in the case,need 3 short screew,
4. the other half shell, install the fan,with 4 short screew,
5. with the longest screw is make the shell together
1 * Clear Housing Case for Raspberry Pi 3 B+
1 * 5V 3A Charger
1 * Cooling Fan
3 * Heat Sinks kit
1 * Screw Driver
1 * Tool Accessories(Screws+Rubbery feet)
10. Thermaltake TtMod Sleeve Extension Power Supply Cable Kit ATX/EPS/8-pin PCI-E/6-pin PCI-E with Combs, Pink/Black AC-046-CN1NAN-A1
Customize your system build with the Thermaltake Toad Sleeved Extension Cable Kit. With three-layered cable design and inner certified 16 AWG wire, the Toad Sleeve Cable Extension Kit offers users more flexibility for easy installation as well as a clean and professional look. The new individually sleeved cables are heat-shrink free to ensure high-quality cable assembly and support for high currents in order to achieve superior performance and stability. With multiple color combos to choose from, each kit includes (1) 24-pin (ATX), (1) 4+4-pin (EPS), (2) 8-pin PCI-E and (2) 6-pin PCI-E with all black cable combs for a streamlined presentation. 2 Year Warranty.
By our suggestions above, we hope that you can found Case Cooling And Power Supply Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!